| Customization: | Available |
|---|---|
| After-sales Service: | Online Service |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
XRC-II Heat pulse thermal conductivity tester
The XRC-II thermal conductivity tester is based on the "heat pulse" test method. It is suitable for determining the thermal conductivity, heat storage coefficient, temperature conductivity coefficient and specific heat of concrete uniform plate, colloidal, powdered and granular materials under dry or different wet conditions. Simple device, high accuracy, fast test speed, reference standard: JGJT12-2019 light aggregate concrete application technical standard, etc. The basic principle of the instrument, based on the principle of unsteady thermal conductivity, is to heat the experimental material for a short time to make the temperature of the experimental material change. According to the characteristics of the change, the thermal conductivity coefficient, the thermal conductivity coefficient and the specific heat of the experimental material can be calculated through the solution of the thermal conductivity differential equation. The instrument adopts embedded control, and can also be used with upper computer for data processing and control analysis.
Main technical performance
1. Application Scope:
This instrument is suitable for measuring the thermal conductivity, temperature conductivity and specific heat of uniform plate, colloidal, powder and granular materials under dry or different moisture conditions. The thermal conductivity of the material under test ranges from 0.1-30W /m2K.
2. Sample size: a thin piece of 200×200× (15-30) mm
Two pieces of the thick specimen were 200×200× (40 ~ 100) mm
3. Electric source ~ 220V, 50HZ
4. Overall dimension (L× W × H) :600×440×720 mm
5. Working conditions:
Ambient temperature 10 ~ 35ºC Relative humidity ≤80%
The room temperature shall be stable ≤±1.5ºC
6. The accuracy of measurement results: ±5%
7. Connect the upper computer to realize automatic testing and data printout.
Main configuration:
1: Test host 1set
2: Data acquisition system 1set
3: Test software 1pc
4: Test device for powder material, colloid material and particle material 1set
*5: Computer (User prepare)
){kind=link}