Drx-II-Jg Laser Diffusivity and Thermal Conductivity Analyzer

• Customization: Available
• After-sales Service: Online Service
• Warranty: 1 Year
• Model NO.: DRX-II-JG
• Transport Package: Export Plywood Case
• Specification: 0.5CBM
• Trademark: Hunan Zhenhua
• Origin: China
• HS Code: 9031809090
• Production Capacity: 50sets/Year

Product Description

Product Description

DRX-II-JG Laser Diffusivity and Thermal Conductivity Analyzer

  DRX-II-JG laser thermal conductivity analyzer uses a laser beam to irradiate the sample, and uses an infrared detector (or a rapid temperature couple) to measure the temperature rise on the back of the sample to calculate the thermal diffusivity  coefficient of the sample. It has the characteristics of fast and convenient. Its measured thermal diffusion coefficient is 0.001... 10cm2/sec, and the specific heat of the sample can be measured to further calculate the thermal conductivity. Used in the testing of metals and alloys, diamonds, ceramics, graphite and carbon fiber, filled plastics, polymer materials, etc.

 The instrument mainly tests thin thermal conductors, solid electrical insulating materials, granular materials, powdery materials, thermal conductivity of coal solid materials, thermal conductive resin, thermal conductive glass fiber and so on. Conforms to GJB 1201.1-91, ASTMD 1461 flash method for measuring thermal diffusivity, ASTM E2585 flash method for measuring thermal diffusivity, GBT 22588 flash method for measuring thermal diffusivity or thermal conductivity.

Principle:
 Place the sample in the automatic furnace sampler and heat the furnace to the programmed temperature. At this temperature, the bottom of the sample is illuminated by an energy pulse (xenon lamp), which generates a uniform temperature rise on the top of the sample. A high speed infrared detector is used to measure the temperature rise on the upper surface of the sample.
 

Detailed Photos

 

 

Product Parameters

Main technical parameters:

Model	DRX-II-JG
Temperature scope	RT ~1000ºC
Sample size	Φ10~25mm Square not less than 10*10mm
Sample thickness	0.1mm~ 10mm
Sample quantity	1 peice with automatic sampler
Sample holder	SiC/Al2O3/metal
Atmosphere	Air
Thermal diffusion	0.01 ~1000 mm^2/s
Thermal conductivity	0.1 W/(m*K) to 2000 W/(m*K)
Accuracy	± 4%
Repeatability	± 3%
Pulse source	Nd: YAG Laser
Pulse energy	15J/Pulse adjustable
Test sample types	Solid block, low viscosity liquid, high viscosity liquid, solid powder (with a fixture), viscous semi-solid, elastic solid, film, etc., can be adapted;
Testing software	Dedicated analysis and testing software, support WIDOWS10 64-bit operating system
Main configurations:	1. Testing host (with infrared thermometer); 2. Heating furnace; 3. Laser controller; 4. Testing software.

 

 

Our services

 

 

 

Company Profile